Ø0,20 mm Cutting Wire Usage Area

Ø0.20 mm titanium cutting wire is very  thin  and suitable for xps cutting . Because of the thin wire, its use requires attention. Ø0.20 Mm Cutting wire is generally preferred for xps cutting because the burning share is less .

Ø0,20 Mm Cutting wire has a very  high breaking resistance  and allows  the material  surface to be very  clean.

Ø0,25 mm Cutting Wire Usage Area

Ø0, 2 5 mm titanium cutting wire is very thinso xps is suitable for cutting . Ø0, 2 5 mm Cutting wire XPS Foam  (Extruded Polystyrene Foam) The most used wire in the section. Burning is very small due to thin wire . Ø0, 2 5 Mm cutting wire has very  high breaking resistance  and ensures very clean surface of material

Ø0,30 mm Cutting Wire Usage Area

Ø0,30 mm titanium cutting wire is very thin for both EPS Foam  (Expand Polystyrene Foam) as well as XPS Foam  (Extruded Polystyrene Foam). In the EPS Foam section, the jamb is generally preferred for interior and exterior materials. Ø0,30 Mm cutting wire is small and has good durability.

Ø0, 3 0 Mm cutting wire has high breaking resistance  and allows very cleansurface of material .

Ø0,35 mm Cutting Wire Usage Area

Ø0.35 mm titanium cutting wire is used for slicing blocks such as Ø0, 40 mm titanium cutting wire  and forcutting jig  and interior material  such as Ø0,30 mm titanium cutting wire. Ø0,35 mm titanium cutting wire can be used instead of the set wo wires because it is between Ø,30  and Ø0,40 mm titanium cutting wires.

Ø0, 35 mm cutting wire can be used in high density xps cutting because the burning share is low . Ø0,35 mm cutting wire has very  high breaking resistance  and the material makes the face very clean.

Ø0,40 mm Cutting Wire Usage Area

The Ø0,40 mm titanium cutting wire is less burnable than Ø0,47 mm  and Ø0,50 mm titanium cutting wires. Forthisreason, it is used instead of Ø0,50 mm titanium cutting wire for less dem and ing and more precise cuts.

Ø0,40 mm cutting wire is frequently used in cutting CNC cutting lines and blocks.

Ø0,40 mm The cutting wire has a very  high breaking resistance  and allows the material surface to be very clean.

Ø0,47 mm Cutting Wire Usage Area

Ø0,47 mm titanium cutting wire is used byvery few manufacturers. Ø0, 47 mm Cutting speed of titanium cutting wire, strength and burningshare Ø0, 50 mm is very close to the Cutting wire. Ø0,47 mm cutting wire is usually in the market instead of Ø0, 50 mm cutting wire is used .

Ø0,47 mm titanium wire cutting EPS Foam  (Expanded Polystyrene Foam) segment. Ø0,47 mm cutting wire is generally used in block cutting lines.

Ø0,47 mm cutting wire is used for material  slicing and side shaving. Ø0,47 mm cutting wire is easily used in high density, carbon rein forced and damp materials.

Ø0,47 Mm cutting wire has very  high breaking resistance .

Ø0,50 mm Cutting Wire Usage Area

Ø0,50 mm titanium cutting wire is the thickness titanium cutting wire used in the market. Ø0,50 mm titanium wire cutting EPS Foam (Expand ed polystyrene Foam) The most used cutting wire in its section. Ø0,50 mm cutting wire is generally used in block cutting lines.

Ø0 50 mm cutting wire is frequently used for material slicing and side shaving. Ø0, 50 mm cutting wire is easily used in high density, carbon rein forced and damp materials.

Ø0,50 mm cutting wire has very  high breaking resistance.